Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that guards against key-cloning, hacking, and vehicle theft. It also helps reduce the cost of insurance and could even qualify you for incentives.
The Ghost immobiliser is discrete and simple to use is built into the ECU of the vehicle. This means that it is impossible to start the engine without an encrypted PIN code.
TASSA Approved
Autowatch Ghost is the best way to protect your vehicle from being stolen by key cloning. It has been certified by TASSA. This is the most advanced technology in car security. It stops thieves from stealing your keys fobs and will also prevent your vehicle from starting after your keys have been cloned.
The Ghost is the newest generation and is connected to the CAN data network of your vehicle. A personalised PIN code can be entered using the standard buttons on the dashboard or on the steering wheel. The Ghost is then able to stop the engine from starting and can be programmed to any number of different settings like Gear Blocking Change, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and doesn't make use of radio frequency signals, which means that it is not detected by RF scanners or a 'code grabber'.
The Ghost is a small weatherproof device that is completely sealed. It can be installed on the dashboard or concealed within the vehicle. In contrast to other alarm and immobiliser systems available on the market, this one is not a Thatcham Category approved product but is recognized by insurance companies as an effective anti-theft system. It also comes with a 5 years of warranty.
The TASSA verification process assures that any installation work done on the Ghost will be carried out by a skilled and qualified installer. This provides the customer's, insurers and police's trust in the high-quality installation. It also guarantees that the installers follow the manufacturer's instructions and set up the product correctly. Installers who are members of TASSA have an unwavering dedication to excellence and have made an impact in the fight against crime.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 is a innovative immobiliser that has been designed to protect your vehicle from modern key copying. Its PIN code system has been integrated into the ECU of your car which makes it much more difficult for thieves to clone the keys or hack the vehicle's system. Additionally the device is discrete and is able to be installed in a wide range of vehicles from minivans to sports automobiles. It's also weatherproof and small enough to hide out of sight. This makes it harder for thieves.
The installation procedure for the Ghost is easy and does not require any additional wiring. It is compatible with a variety of vehicles and connects to the vehicle's data network, CAN. Additionally, it can be switched off or deactivated from the vehicle's main screen. The device is compatible with a variety of mobile apps that permit you to manage the security of your vehicle remotely.
The Ghost could have issues following installation, despite its numerous benefits. These issues can result from a variety of causes, including defective wiring or an app that is not compatible with the Ghost. In these instances the best option is to call an expert installer to fix the problem.
Users also face difficulties getting into the sequence of disarming the Ghost. This is usually due to forgetting the correct sequence or not practising it. However, the user manual includes an emergency code that can be used in case of such issues.
Distinction
Autowatch Ghost is a discreet and sophisticated security system that guards your vehicle from theft. The device is inaccessible to thieves and uses the CAN data network of your vehicle to function. It is also able to be triggered by other security systems, such as car alarms, and also provides real-time alerts for calls to the owner. These features can aid the police to locate your vehicle if it's stolen.
This system is compatible with a wide range of vehicles and can be installed within less than an hour. It's a TASSA-approved aftermarket device that is compatible with vehicle trackers and is even recognized by a number of insurance companies. It is also tamper proof and quiet, so criminals will not be able to hear its operation. The Ghost immobiliser can also be programmed to require a PIN of up to twenty numbers. This makes it virtually impossible to determine the PIN.
Ghost can only be used only when the vehicle is in the Service/Valet Mode. This will prevent you from accidentally giving the PIN number to a mechanic or any other person who needs to access your vehicle's computer system. The Ghost also comes with a 5-year warranty.
The Autowatch Ghost is a revolutionary immobiliser that can stop key cloning as well as ECU hacking, as well as car theft. It's an aftermarket CAN bus device that's an excellent option for both new and older vehicles. It's simple to install and runs quietly. This enables it to be used in any vehicle without cutting wires. You can also change your pin in a matter of minutes to make sure that only you are aware of it. The system also doesn't use RF scanning or code-grabbing technology, which means it is virtually inaccessible.
Simple to use
Autowatch Ghost is a highly effective and innovative security system that disables the engine to stop theft of the vehicle. It is operated by a code that is personalised by the owner of the vehicle. This code has to be entered in order for the vehicle to start. This technology is advanced and enhances the overall safety measures of your vehicle making it a preferred option for many motorists. The installation process isn't without challenges. It requires careful planning and attention to the smallest of details. This includes ensuring compatibility, relying on the expertise of a professional in compliance with laws and regulations, and fully knowing the Ghost II's operational dynamics. The importance of these aspects is to ensure an efficient installation and optimal functionality.
The Ghost II is a silent system that is not spotted by thieves. It is also weatherproof and compact making it difficult to steal your car. It is also compatible with CAN and Lenastark, which permits it to be used in a variety of vehicles. It can also be used in vehicles that require isolation of the battery to ensure maintenance. The Ghost 2 has a Transport Mode that disables the device while your car is being rented or loaned.
Before you start the Ghost 2, you will need to enter a PIN code that is unique to you. Installers will create an initial code, however it is best that you change it as soon as possible for your own safety. The device can go into sleep mode to conserve battery power but it will re-wake when it detects an engine management signal. This feature is able to be disabled within the Settings menu. It is recommended to use the Ghost immobiliser while your vehicle is being driven, and to always make sure to lock it when leaving it unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, stops car thefts by removing a vehicle's engine. It works with a code that is exclusive to the owner, which makes it a potent deterrent. However, installing this device requires careful preparation and a keen eye for detail. By adhering to the legal guidelines, adhering strictly to the law, and relying upon the expertise of experts, you can ensure that the installation process is smooth and you get the most benefit of this security system.
This unique CANbus immobiliser from Autowatch is simple to install and operates in a quiet manner, so that criminals are unable to hear it operating. It uses CAN bus communication to communicate with the vehicle. Compatible with a wide range of vehicles. It's a revolutionary advancement in the field of vehicle security. It also protects your car from hacking, key cloning and car theft, since it won't start unless you have the proper pin code. It is small and weatherproof, making it difficult for criminals to alter or spot.
To begin using your Ghost Immobiliser, you need to look up the wiring diagram of your vehicle and identify the CAN high (CAN H) and CAN low (CAN L) wires. Connect the CAN high and low wires to the ECU. The wires are located on the dashboard, or close to the engine.
car ghost immobiliser is recommended to employ an accredited and reliable installer to install your Ghost immobiliser. This way, you will be certain that the system is installed correctly and won't interfere with your vehicle's functionality. Moreover, the installer will be able to advise you on how to use your new gadget effectively.