The Ghost Immobiliser
Immobilisers can be a powerful weapon in the fight against car theft. They stop the vehicle from starting if it isn't equipped with a key fob. They also work well to stop hotwiring or other traditional forms of vehicle theft. However, more modern methods such as key cloning and relay theft are becoming more widespread.
Designed to combat these recent trends The ghost immobiliser works to make your vehicle completely undetectable. It doesn't use LED indications, radio signals or key fobs, and is quiet and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network in your vehicle to stop key theft and cloning. It is a TASSA-approved product and insurance companies also endorse it. It operates quietly and is virtually undetectable to thieves. It uses buttons in your steering wheel, centre console and doors to create an individual pin code sequence that has to be entered before you are able to start your vehicle. You can create as many as 20 different sequences to increase security. It's easy to install and doesn't require any additional hardware.
To ensure the highest quality outcomes it is recommended you use a reputable CAN-immobiliser installer who is skilled in your specific vehicle. Idealy, they should have a workshop close to you where you can go to complete your installation. You will also find various tools and materials that will aid you in the installation. These include basic hand tools, a multimeter, and insulation tape, as well as heat shrink tubing to safeguard the connections. A user's manual will provide you with instructions for the wiring in your vehicle.
Before beginning the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. It is important to double-check the exact location of the CAN H and CAN L wires, since incorrect identification could lead to an inefficient system integration. It is also a good idea to mark the wires using small pieces of tape or label them with labels. Finally, use a multimeter to verify that the power source identified provides a consistent 12V supply.
Advanced thieves may employ various tactics to bypass Ghost Immobilisers, including blocking or spoofing. These methods work by amplifying the signal that is sent from your key fob to the electronic control unit in your vehicle. However, with advanced anti-jamming technology and vigilant monitoring you can shield your vehicle from these sophisticated attacks.
Security Enhanced
Ghost immobilisers provide an additional layer of protection to your vehicle from theft. It uses an PIN security system that you can enter by pressing buttons on your dashboard or steering wheel which makes it more difficult for thieves to take your vehicle. The device is also designed to be hidden inside your vehicle, without any other lights or signals that could signal a potential criminal to its presence. It connects directly to the ECU of your car through the data bus. This means that it is not susceptible to hacking or relay attacks.
The system is an excellent investment for those who own prestige vehicles, as they are at a greater risk of theft due to their worth and the popularity. The enhanced features of the system protect your car from key cloning and ECU swapping. Ghost immobilisers can be integrated with apps, meaning you can arm and disarm quickly. They can also have a service/valet mode that allows you to temporarily deactivate them while your vehicle is being serviced or repaired.
Ghost immobilisers have another wonderful benefit: it doesn't require any wire cutting. This is a great feature, especially if the vehicle is newer and doesn't come with an immobiliser. Some systems can also integrate with GPS tracking devices, providing an additional layer of security to your car. A GPS tracker can also aid in reducing your insurance premiums. If you choose to buy a ghost immobiliser, ensure that it is TASSA-verified and that a professional installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser is made to work with all major models and makes, securing your pride and joy from theft. It generates a unique pin code by pressing buttons on your steering wheel, console or door panels. You must enter the code before you can drive. It is tamper-proof and undetectable. It is also comes with a three-year guarantee. It is also fully certified by insurance companies, which means that it could help lower your insurance premiums.
The Ghost system is different from normal immobilisers, which use the key fob for ignition control. It is directly connected to the engine controller through the CAN bus. This means it is secure from tampering, is nearly impossible to remove or disable and cannot be hacked by organised car thief gangs. The Ghost system can also be paired with an iPhone app to monitor remotely and management.
You can design a PIN that is simple to remember, but mathematically, it is impossible to guess for thieves. You can alter and customize the PIN at any time to ensure your vehicle's security even if it's situated in a parking area or on the street. You can also select valet or service mode in the event that someone else needs to drive your vehicle temporarily, such as when it is in the garage. This feature will also help prevent your car from being stolen by a shady mechanic. You can opt for an Ghost Call alert to give you extra security. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser shields your vehicle from common theft methods such as key replication or relay attacks. It works by connecting to the car's data network CAN and preventing communication with the engine ECU. This makes it very difficult for thieves to hack or clone your vehicle.
After installation, you'll have to enter a PIN code that is up to 20 digits using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely concealed and inaccessible to thieves since it doesn't emit any radio frequency signals. web link can also be set to a user-changeable PIN code, which adds security. The system is also designed to prevent cutting the circuit and makes it virtually impossible to alter.
Certain systems let you communicate directly with the immobiliser using an app on your phone, disarming it immediately if you forget your PIN. Some even come with the option of a service/valet mode, which allows you to start your vehicle temporarily, for instance, when you have to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also inaccessible to thieves, as it does not transmit radio signals. This is an important advantage over other aftermarket security systems. It is also simple to use, and doesn't require complex wiring. It can also be used together with a dash cam to provide additional security. Dash cams include the Thinkware F70, which features clear and crisp 1080p HD dashcam footage as well as Format Free Technology and parking mode. The system can also be wired for optimal performance and longevity.
Installation
If you're looking to safeguard your vehicle from thieves It is essential to choose the correct immobiliser ghost. This device can prevent car thefts by blocking the communication between key fobs and the engine controller unit. This stops thieves from stealing the signal and copying the key fob to begin your vehicle. It also detects any signs of manipulation and notify the owner of the vehicle.
The device is easy to install and integrates with the existing systems in your vehicle. It requires no modification to the vehicle's wiring and can be tucked away in a secluded place, like under the dashboard. To make sure that the device is correctly installed, follow the instructions in the manual for the user. It is also essential to test the system after installing it. This will ensure that the ghost of the immobiliser functions as intended.
You can buy an Autowatch Ghost 2 immobiliser and have it installed by a reputable installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to remove or bypass the system. The installation process typically takes between 2 and 3 hours.
During the installation process, it is recommended to look up the wiring diagram for your vehicle model. This will enable you to find the CAN High and Low wires. Low wires that are required to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure they are secure and insulated.
Once the installation is completed, you can start using the Ghost Immobiliser normally. It will shut off the ignition of your vehicle if you don't start it with the correct PIN, which you will need to enter yourself. The ghost immobiliser cost can also be put into Service/Valet mode for times when you need to hand over your vehicle for servicing or valet parking.
